
P.G.E - AST
ANTI SLIP TREATMENT
IDEAL FOR
AROUND SWIMMING POOL AREAS
What is – AST?
ATS- is a
transparent anti slip solution, which has a very low odour that can
be applied to a variety of surfaces radically improving the slip resistance
when wet.
The Health & Safety Executive states "Floors need
to have enough grip for pedestrians to walk safely,
but what does this mean? Grip is measured as ‘Coefficient of Friction’. For safe
pedestrian walking on the level this should be 0.36 or higher." It also
says "it’s no good testing a clean and dry floor then expecting it to be
slip resistant in the wet." 
The workplace regulations
1992 requires floor surfaces to not expose any person to a safety risk.
Our Anti-Slip treatment
reduces the risk and dangers of slips and falls and the resultant potential of
personal injury. Health and Safety Executive figures for 2001/02 show
that 10,118 non-fatal slip/trip/fall accidents occurred.

Fast food outlets, nursing homes, restaurants,
shopping centres, supermarkets, office
buildings, banks, hospitals, hotels, sports centres, pools and spas, country
clubs, schools and colleges are just a selection of facilities that would
benefit from PGE Anti-Slip treatment.
Anti-slip solution Can
be used on most types of hard surfaces such as ceramic tiles, slate, terrazzo,
quarry tiles, marble, stone, concrete and enamel baths and showers trays.
Contact us
for you free estimate and information pack
0034 658
484 993
aroundpoolsmenorca@hotmail.com
PRODUCT
The solution for safer floors
P.G.E-AST -Anti Slip Treatment is designed to increase the coefficient of friction
on a variety of flooring materials, for example tiles or Terrazzo, bath tubs and shower trays by creating micro
pores in the surface which create a vacuum effect when walked on in a wet
condition and thereby considerably improving the traction and seriously
reducing the risk of slipping.
P.G.E-AST -Anti Slip Treatment will create micro pores in natural materials and
manufactured products that are a fusion of materials bound with cement or clay
including concrete, quarry tiles, ceramic, marble, terrazzo, granite, slate,
stone, porcelain and enamel finished bath tubs and shower trays.
There is no significant change in the appearance of many types of surfaces
treated with SLIP SAFE and it is not a coating that can wear down or peel off.
It is a treatment process that reacts with the material itself to produce an
invisible and lasting effect.
AN P.G.E-AST- treated surface is a safer surface to walk on
when wet
Wet floor surfaces are a serious risk to health and safety, injuries caused
through slips and falls are very common when such conditions exist.
P.G.E-AST - Anti
Slip Treatment is both easy and safe to apply and typically 60 to 100m˛ per
hour can be achieved by an individual worker, bath tubs and shower trays
usually take no more than 10 minutes.
P.G.E-AST - Anti
Slip Treatment is applied by our agents following the removal of sealers and
grease to enhance the effectiveness of the treatment. The surface to receive
the treatment must be thoroughly clean and dry.
We believe P.G.E-AST - Anti
Slip Treatment is one of the most user and environmentally friendly products of
its type on the market.
Once treated with P.G.E-AST - Anti Slip Treatment areas such as bath tubs and shower trays and lightly
trafficked areas will have an effective slip resistance for at least 3 years
while areas subjected to heavy or regular high usage should have an effective
life of 2 years.
Maintain the anti-slip performance by regularly cleaning with good cleaning
products.
We recommend SAFEKLEEN Multipurpose Cleaner, which
has been specially formulated to keep a P.G.E-AST
treated surface at its optimum level of performance.
Do not apply wax based polishes or emulsions to surfaces treated
with the P.G.E-AST anti-slip solution as this will have the effect of filling the micro pores
created by the treatment. The appearance of a P.G.E-AST
treated surface can be enhanced by dry buffing to bring up a shine.
Safe Kleen Multipurpose Cleaner
Safe Kleen was specially
formulated by our boffin's for keeping a STOP-SLIP treated floor or bath free from
the buildup of grease and dirt deposits to maintain the treated surface at its
optimum level of performance.
PGE - Safe Kleen is also an EXCELLENT Multipurpose
hard surface cleaner
Dilute in hot or cold water
Contains a rinse off additive
Biodegradable
Fantastic for washing cars/bikes
Commercial Vehicles Machinery and Plant
Can be used with pressure washers and wash/vac systems
Just 5 litres makes up to 1000 litres of Cleaner.
Safe Kleen Multipurpose Cleaner Removes Oil, Grease and Grime In quick quick time.....
Application Information
Dilute in a typical bucket containing 8 to 10 litres of water as follows:-
Light duty: 2 capfuls
Medium duty: 3 capfuls
Heavy duty: 4 capfuls
Dilutions can be adjusted to suit individual cleaning requirements.
Apply liberally over surface and allow a few minutes of contact time.
Rinse thoroughly and dry.
Safe Kleen can be used neat on oil and grease patches allow to soak for 10 minutes then rinse.
Very stubborn stains may require more than one treatment.
CAUTION: Do not use in direct sunlight or on hot surfaces, as premature
drying will prevent the active ingredients from performing their functions
correctly.
Contact us for you free estimate and
information pack
aroundpoolsmenorca@hotmail.com